cecotec READYWARM 2070 MAX DUAL Manual De Instrucciones página 38

ENGLISH
4. CLEANING AND MAINTENANCE
Keep the appliance clean. Dust, dirt or deposits in the appliance often cause overheating.
Make sure that this type of accumulation is removed on a regular basis.
Always turn the appliance off, unplug it from the power supply and allow it to cool down
before:
- cleaning the device
- performing maintenance of the device by the users
- touching or moving the appliance.
- Never switch on the device if you notice damage to the device, the cable, or the plug, if it
is not working properly, if it makes strange noises, smells funny or you can see smoke, or
if it has been dropped or shows any other signs of damage.
- Unplug the cable from the power supply immediately. Have the appliance checked and/
or repaired by your supplier or a recognised electrician. Always request the use of original
parts.
- The device may only be opened and/or repaired by a competent and qualified person.
Do not carry out your own repairs, as this could be dangerous. Repairs carried out by
unauthorised persons or modifications made to the device may damage the dust and
water protection capability of the device and will void the manufacturer's warranty and
liability.
- If the power cable is damaged, it must be replaced by the manufacturer, service
technician or similarly qualified person in order to avoid creating a hazard.
- Failure to comply with the above points may result in damage, fire and/or injury. The
warranty will be invalidated and the supplier, importer and/or manufacturer will not be
liable for the consequences.
- Keep the heater clean. Dust and dirt deposits on the device are a common cause of
overheating and should be removed regularly. Switch off the heater, remove the plug
from the socket and allow the heater to cool down before cleaning or maintenance work.
- Clean the outside of the heater regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, cleaning or abrasive sprays, waxes, polishes, or chemical solutions.
5. TECHNICAL SPECIFICATIONS
Product reference: 08284
Product: ReadyWarm 2070 Max Dual White
Supply voltage: 220-240 V, 50 Hz
Maximum capacity: 1800 W
Settings: 0-900-1800 W
38
READYWARM 2070 MAX DUAL WHITE