Publicidad
Idiomas disponibles
Idiomas disponibles
SF 1040 SF 1140
ASSEMBLY INSTRUCTIONS
1. Install the internal pole onto the base and join them with 7 finger screw. Choose the desire height of
internal pole and adjust it tighten height adjustment ring.
2. Introduce internal pole in fan's body and tighten thumb screw to fix it to the pole.
3. Place rear guard on frontal motor housing with handle upwards. Tighten the plastic nut to fix the guard.
Insert the fan blade in the motor shaft and screw the spinner. Place fixing ring on front guard and then join
both guards by the ring. Tighten the screw of the fixing ring for fixing both guards.
OPERATING INSTRUCTIONS
- ADJUSTING DIRECTION OF AIRFLOW: You may adjust the angle, upwards or downwards, from the motor
casing.
- ADJUSTING OSCILLATION: For oscillation or stopping, firmly pull or push the screw above the motor
casing.
- ADJUSTING SPEED OF AIRFLOW & TYPE OF AIRFLOW: Press the Airflow Speed Button to adjust the speed.
– OFF
I
– Low
II
– Medium
III
– High
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most efficient operation. Unplug the fan, then
reserve the assembly procedure to remove those parts from the motor assembly before cleaning. Wipe
with a damp cloth then towel dry.
Never immerse any fan components in water. Wipe the fan only with a dry or slightly moist cloth, then
immediately towel dry.
Always store the fan in a cool dry location.
11
Publicidad
