Operation In Automatic Mode - SOMFY Easy Sun io Manual Del Usuario

Ocultar thumbs Ver también para Easy Sun io:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The lights and heating rails are switched
on or off.
The windows open or close fully.
- Pressing and holding
the type of motor or receiver:
The roller shutters, awnings, vertical blinds, venetian
blinds and roller blinds with adjustable slats raise or
lower completely.
The brightness of the lights or the intensity of the
heating rails varies (only if the receiver has this function).
The windows open or close fully.
STOP function
- The applications of a group are activated.
- Select the group to be controlled (see the section
«Selecting a group»).
- Press
:
- The applications of the selected group stop
automatically.

4.2 Operation in automatic mode

When positioned on its magnetic bracket, the Easy Sun io is in automatic mode.
This mode is used to activate the Sun function for applications in the «Sun» group.
Make sure that a sun sensor is paired with the Easy Sun io to allow the applications linked to the
«Sun» group to be controlled in automatic mode.
4.2.1 Activation/Deactivation of the Sun function
- The Sun function is activated as soon as the Easy Sun
io is in automatic mode, ie. positioned on its magnetic
bracket.
- The Sun function can be deactivated in one of two ways:
When removed from its magnetic bracket, the Easy
Sun io is in manual mode.
Without removing the Easy Sun io from its magnetic bracket, press
displays the
symbol.
- To reactivate the Sun function: press
symbol.
4.2.2 Description of automatic mode
The Easy Sun io must be in automatic mode to allow the Sunis WireFree™ io sensor to operate on
the associated applications (see the section «Using the Sunis WireFree™ io and Sensor Box io»).
When the Sun function is active:
- The applications linked to the «Sun» group respond automatically to variations in the level of
sunlight.
When an application is activated by the Sun function,
pressing
stops this activation without deactivating
automatic mode.
The use of an additional wind protection device (e.g.
wind sensor) is recommended for awnings.
Copyright © 2009-2011 Somfy SAS. All rights reserved.
or
deactivates the applications of the selected group, depending on
or
OFF
+
100%
-
0%
again: the screen displays the
Easy Sun io
ON
+
100%
-
0%
or
: the screen
or
5

Publicidad

Tabla de contenido
loading

Tabla de contenido