SOMFY Easy Sun io Manual Del Usuario página 12

Easy Sun io
Observations
The sun protection
applications ( « Sun » group)
do not activate.
The « » symbol appears
on the Easy Sun io screen.
The Easy Sun io displays
the « » (alert) and «
symbols ( « Sun »
group).
The Easy Sun io displays
the « » symbol (alert).
List of possible alerts:
Symbol
10
Possible causes
The Easy Sun io Sun function is
deactivated, and the applications
linked to the « Sun » group no longer
react automatically to variations in the
level of sunlight.
The motors or receivers are paired
with a wind sensor and the wind
speed exceeds the set sensitivity
threshold: the «
displayed on the Easy Sun io.
The sunlight sensitivity threshold is
incorrectly set.
The Sensor box io is disconnected.
The sun sensor is not operating.
The Easy Sun io batteries are low
» The sun sensor batteries are low.
The wind sensor batteries are low.
Alert
The motor or receiver has been set to local mode from its local control
Local point. It is isolated from automatic control. Set it to automatic mode to
control it automatically using the Easy Sun io.
In manual mode: radio problem, the motor or receiver is not
responding. The motor or receiver may be out of range or have no
Radio
power supply.
In automatic mode: the Sensor box io is disconnected.
Stoppage at an obstacle: the application has encountered an obstacle.
Obstacle If the obstacle is encountered during raising, give a lowering order to
clear the alert.
Motor in heat protection mode. After heavy use, the motor switches to
Heat
protection mode. Wait 15 minutes for the motor to cool.
Activate the Sun function,
see the section « Operation in
automatic mode » .
Wait for the wind to drop. Refer
to the wind sensor's operating
guide.
» symbols are
Readjust the threshold, see the
section « Adjusting the sunlight
sensitivity threshold » .
Check that the Sensor Box
io is properly connected, and
reconnect it if necessary.
See alert «
Replace the batteries in the
Easy Sun io, see the section
« Replacing the batteries » .
See alert «
If several wind sensors are
paired to the Easy Sun io,
the information may only
refer to one wind sensor.
See alert «
Explanation
Copyright © 2009-2011 Somfy SAS. All rights reserved.
Solutions
».
».
».