Replacing The Batteries In The Sunis Wirefree™ Io; Technical Data; Sunis Wirefree™ Io Technical Data; Sensor Box Io Technical Data - SOMFY Easy Sun io Manual Del Usuario

4. REPLACING THE BATTERIES IN THE SUNIS WIREFREE™ IO
Never use rechargeable batteries.
- Open the Sunis WireFree™ io:
- Rotate the sensor on its wall bracket (anticlockwise)
to align the two arrows on the side and separate the
two parts.
- Remove the batteries and insert 2 new 1.5 V AA (LR6)
alkaline batteries, observing the correct polarity:
level of the batteries is low; insert new batteries.
The sensor's indicator light comes on green: the
power level of the batteries is OK.
-
arrows, and turn it clockwise to lock it.
When replacing the batteries, all the programmed settings
are stored with no time limit.
In case the sensor is not used for prolonged periods of
time, it is recommended that the batteries be removed.

5. TECHNICAL DATA

5.1 Sunis WireFree™ io technical data
which searches for an unoccupied radio frequency prior to transmitting.
Protection rating: IP34.
Safety level: Class III.
Operating temperature: -20°C to +60°C.
Dimensions of the Sunis WireFree™ io in mm (h x w x d): 78 x 78 x 37.
Power supply: 2 AA (LR6) 1.5 V batteries.

5.2 Sensor Box io technical data

which searches for an unoccupied radio frequency prior to transmitting.
Protection rating: IP30.
Safety level: Category II
Operating temperature: 0°C to +60°C
Dimensions of the Sensor Box io in mm (h x w x d): 100 x 50 x 78
Maximum number of connected io control points: unlimited.
Maximum number of connected io sensors: 10.
Please separate the storage cells and batteries from other types of waste and recycle them
via your local collection facility.
Copyright © 2009-2011 Somfy SAS. All rights reserved.
Easy Sun io
13