Publicidad
Idiomas disponibles
Idiomas disponibles
5. Clean the water reservoir with a
50/50 mix of white vinegar and
water on a cotton ball or clean,
soft cloth as needed. Wipe off
with a damp cotton ball or soft,
clean, damp cloth.
6. After cleaning,
reassemble the
humidifier, fill with
water, plug in, and
turn on.
TO CLEAN THE TANK
Remove the tank cap and tank cover from the humidifier.
Every day: Empty and rinse the inside of the tank before refilling.
Every week: To remove any scale or buildup, use a 50/50 mixture of white
vinegar and lukewarm water to clean the inside of the tank.
TO CLEAN THE OIL TRAY
Open the oil tray and remove the pad. Essential oil pads should be changed
when switching to a different scent. If continuing to use the same scent, set
the oil pad aside for reuse. Wipe the inside of the oil tray with a soft cloth.
Place the essential oil pad back in the tray and close.
NOTE: Leave the essential oil pad out of the oil tray when storing.
TO CLEAN THE SURFACE
Clean the surface of the unit with a soft, damp cloth.
STORAGE
Clean the surface of the unit with a soft, damp cloth. Clean the tank
cap, tank, mist chimney, water reservoir, and the transducer/ultrasonic
membrane with a 50/50 mixture of white vinegar and water. Be sure to rinse
and let all parts dry completely before storing. Clean the oil tray with a soft,
damp cloth.
After storing: Rinse the tank with water prior to operating.
11
7. Press and hold the clean
transducer/ultrasonic
membrane button for 3
seconds, until the LED light
above the button turns off.
Publicidad
