Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL PANEL OPERATION
6
7
1
ON/OFF: Unit On/Off button. Pressing once turns the unit on and leaves it ready for
operation. Pressing again turns the unit off.
Pressing and holding the On/Off button turns the LED on at maximum brightness; holding
it down gradually decreases brightness by approximately 20% every half second; and
releasing the button will maintain the same brightness as the LED.
2
MODE: Select the unit's operating mode from between AUTO, ECO and VENTILATION.
Operation modes:
- AUTO: Automatic operation: Allows comfort temperature to be selected between 16 and
31 ºC. The unit autonomously adjusts compressor, electric fan, and blower speed.
- ECO: Energy-saving mode: Automatically limits unit power in order to reduce energy
consumption. Allows comfort temperature to be selected between 22 and 31 ºC. The unit
autonomously adjusts compressor, electric fan and blower speed.
- VENTILATION: Fan function: Allows blower speed to be selected from between 5 speeds.
The compressor and the electric fan remain off in this operating mode.
- MANUAL: Manual operation: This operating mode is activated from AUTO operating
mode by holding down the up or down button on the control panel or remote control. The
user can select unit operation from 5 different speeds. The operating mode LEDS will
remain off while the unit is operating in manual mode.
3
Button to increase temperature in AUTO and ECO modes, time in AUTO-OFF CONFIGURATION,
and blower speed in VENTILATION mode. A short press in AUTO and ECO modes increases
the target temperature by 0.5 °C. A long press in AUTO mode changes the operating mode
to MANUAL, leaving the user to select the unit's operating speed. Each press in AUTO-OFF
CONFIGURATION mode increases auto-off time by 15 min.
8
11
9
1
2
3
USER´S HANDBOOK
10
12
4
5
EN
OPENAIR
13
TU ESPACIO DE VIDA CONFORTABLE
15
Publicidad
