Publicidad
Idiomas disponibles
Idiomas disponibles
Accuracy
1. Temperature accuracy:
-40°C ~ -20°C: ± 4°C
-20°C ~ 0°C: ± 2°C
0°C ~ +50°C: ±1°C
Note: when the temperature in -50°C ~-40°C and 50°C ~ 70°C range, the temperature is only for reference.
2. Humidity accuracy:
+/- 5 % RH (@25°C , 30%RH to 50%RH)
+/- 15 % RH (@25°C , 1%RH to 29%RH, 51%RH to 99%RH)
Temperature alert set
1. Press the MODE button thrice to check Alert setting mode, Press and hold SET button for approx. 3 seconds to enter
the Alert setting mode.
2. In Alert setting mode, press "SET" to set and order is: outdoor temperature upper limit
temperature lower limit
limit
on/off
exit.
3. Press UP or DOWN button to change the value, the value will increase or decrease 0.5°C each time.
4. Press or no handling in 10s will exit.
Temperature alert
1. Temperature and alert icon will flash when alert.
2. In temperature alert status, alert temperature icon will twinkle and temperature will always display.
3. Temperature alarm sound:
a. Three Bis for every minute
b. Not stop alarm until meet stop conditions.
4. Turn off the alarm sound, press and hold ALARM button for approx. 2 seconds to turn off the outdoor alarm sound, the
symbol will display; press and hold ALARM button for approx. 2 seconds to turn off the outdoor alarm sound,
the
symbol will display; press and hold ALARM button for approx. 2 seconds to turn off the outdoor alarm
sound, the
and
press and hold ALARM button for approx. 2 seconds to turn on the outdoor alarm sound, the
symbol should not display.
Note: This operation only turns off the alarm sound, the temperature alert is still turn on, when the temperature
reaches the alarm value, and there is no alarm sound, but the icon still twinkle
5. Temperature Alert turn off conditions:
a. When the temperature exits alert range.
b. Enter the Alert setting mode and select the OFF
Setting the Temperature Units:
To switch the temperature measurement between Celsius and Fahrenheit, in normal mode, press the "SET" button which
is also the C/F option button. You can switch between Celsius and Fahrenheit at any time (except when setting other
setting options).
Checking the MAX/MIN temperature and humidity
a. Press the "UP" button to check MAX/MIN temperature and humidity.
b. Press and hold the "UP" button to clear the record of MAX/MIN temperature and humidity when display shows MAX or
MIN temperature and humidity.
on/off
indoor temperature upper limit
symbol will display;
on/off
on/off
indoor temperature lower
outdoor
and
Publicidad
