Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the Channel:
Setting the channel connection between the display unit and outdoor sensor:
a. To change the channel on the display unit between 1, 2, 3 &1-3 sequential display, press the "RF" button. The channel
setting will display on the above of the outdoor temperature.
b.
To change the channel option on the outdoor sensor open the battery compartment cover, on the upper left side is
a button.
c.
ALWAYS MAKE SURE THE CHANNEL CHOSEN ON THE DISPLAY UNIT MATCHES THE CHANNEL OPTION CHOSEN
ON THE OUTDOOR SENSOR.
Moon phases
This weather station is able to display the moon phases for the northern hemisphere. Here the moon grows from the
right. This is because the sunlit side of the moon in the northern hemisphere moves from right to left.
Back Light:
a. When the display unit is powered by battery only the back light will be off to preserve the battery. Press the
SNZ/LIGHT button to turn the back light on for 5 seconds.
b.
When the display unit is powered by the adapter the back light will always remain on. Press the SNZ/LIGHT button
to adjust the brightness of the back light: HI
Note: When weather station is receiving RCC signal, the display
will be dark. If the unit has got the RCC signal successfully or the RCC signal is not received automatically after 7 minutes,
the display will light up again.
Low Battery Indicator:
If the low battery indicator is displayed on the LCD for either the outdoor sensor or the display unit, immediately change
the batteries to prevent disruptions in communications ofthe devices.
Weather Forecast:
a. The unit predicts weather condition of the next 12-24 hours based on the change of atmospheric.
pressure. The weather forecast is based on atmospheric pressure change and is about 70-75% correct.
The following are icons that will show:
Sunny
Partly sunny
NOTE: After setting up, weather forecast readings should be disregarded for the next 24 hours. This will allow sufficient
time for the weather station to collect data and therefore result in a more accurate forecast. Common to weather fore
casting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy
level of about 75% due to the varying areas theweather station has been designed for use in.
Placement of the Device:
Proper placement of both the display unit and the outdoor sensor are critical to the accuracy and performance of
this product.
DISPLAY UNIT PLACEMENT
Place the display unit in a dry area free of dirt and dust. Display unit stands up right for tabletop/countertop use.
LO
OFF.
Cloudy
Rainy
Stormy
Snowy
Publicidad
