Proline KM1400W Manual De Instrucciones página 60

Problem
The appliance doesn't
Noise in the mixing
bowl when working (the
accessory scraped the
bowl).
The appliance doesn't
work on certain speed.
Movements occur when
the appliance is working.
The head release lever
didn't spring back in place
after installing the mixing
bowl and bowl cover.
Ratings: 220-240V~ 50-60Hz
1400 W
KM1400W IB.indd 57 KM1400W IB.indd 57
TROUBLESHOOTING
• Check if the plug is in good contact with the socket.
• Check if the head release lever springs back in place.
work. • Check if the appliance works continuously more than 6 -
10 mins, and wait until the motor cools down.
• Check if the mixing bowl is properly installed.
• Check if the accessory is installed properly onto the
appliance.
• Check if the mark on speed selector corresponds to the
speed silkscreen on housing.
• Turn the speed selector to 0 ,and then turn to a speed
position to recheck if the appliance works.
• Check if the anti-slip feet fall off.
• Check if the appliance is placed on a smooth and flat
tabletop.
• Check if the bowl cover is placed on the mixing bowl
properly.
• Check if the mixing bowl is properly installed.
SPECIFICATIONS
Solution
57
5/10/2023 3:49 PM 5/10/2023 3:49 PM