Descargar Imprimir esta página

WINIA WRN-M320EW Manual De Instrucciones página 30

Publicidad

Idiomas disponibles

Idiomas disponibles

WRN-M379ETD
Due to technological innovations, the product descriptions in this manual may not be completely consistent with
your refrigerator. Detailed information is in accordance with the final product.
Preparations for use
Installation location:
1.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator
from rusting and leaking electricity. The result of the refrigerant charge amount of the refrigerator being divided by
the total space of the room in which the refrigerator is installed shall be less than 8g / m³ .
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
2.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 30mm of free space should be spared at
the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm :
W
D
595
635
Note:Figure 1, Figure 2 only illustrate the space demand of the product.
H
A
B
1855
966
1176
No
Description
1
Temperature modes & LED Light
2
Fridge glass shelves
3
Crisper cover
4
Salad crisper
5
freezer drawers
6
Leveling feet
7
Bottle racks
8
Water tank assembly
E
F
C(°)
130
50
100
23 / 31
MODEL
WRN-M320EW/ET
WRN-M379ETD

Publicidad

loading

Este manual también es adecuado para:

Wrn-m320etWrn-m379etd