Mark 720-0778A Manual De Instrucciones página 11

Assembly Instruction
continued
Fig.3
1d). Align the bottom key holes on side burner
bowl with 2 loosened screws on right side panel.
Attach the side burner bowel to the cart with the
two loosened screws on the side panel. See Fig.3
Tip: This step is meant to help with the installation
but do not depend solely on the two screws to hold
the weight of the side burner shelf.
Fig.4
1e). With the three screws removed in Step 1c)
insert them from inside the fire box into the side
burner bowl. Tighten screws from inside the fire
box. See Fig.4
1f) Tighten the two screws loosened in step 1a).
See Fig.4
1g). Attach the side burner control panel to the
main control panel by tightening the screw
removed in step 1b) from underneath the side
burner bowl. Screw passes through the side
burner control panel to the main control panel. See
Fig.4
11