Mark 720-0778A Manual De Instrucciones página 13

2d). Align the bottom key holes on side shelf
with 2 loosened screws on side panel. Attach
the side shelf to the cart with the two loosened
screws on the side panel. Hook the side shelf
into the two screws. See Fig. 7
Tip: This step is meant to help with the
installation but do not depend solely on the two
screws to hold the weight of the side shelf.
2e). Insert the three screws removed in Step
(2c) from inside of the fire box
through the side shelf. Tighten screws
from inside the fire box. See Fig. 8
2f). Tighten the two screws loosened in step
(2a). see Fig. 8
2g). Attach the side burner control panel to the
main control panel by tightening the screw
removed in step 2b) from underneath the side
shelf. Screws pass through the side shelf
control panel to the main control panel. See
Fig. 8
Assembly Instruction
Fig.7
Fig.8
13
continued