Mark 720-0778A Manual De Instrucciones página 37

Natural Gas Conversion for Model#
Rear Burner Conversion
Tools required:
Steps：
1. Remove the two screws securing the rotisserie heat shield from inside the firebox. Remove three screws
securing and drop off the Rear Baffle from the back of the grill.
2. Remove the (Liquid Propane) orifice with 6mm wrench.
3. Replace the NG orifice with 6mm wrench. Then put rear baffle and screw back into original position.
Phillips Head Screwdriver (+)
6mm Wrench
37
720-0778A