Descargar Imprimir esta página

Clatronic KA 3131 Instrucciones De Servicio/Garantía página 30

Máquina automática de café

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
07-KA 3131 Kaffeeautom.
GB
Before making coffee in the machine for the first time rinse two to three times
with cold water in order to clean the machine.
Clean the filter pad and the glass pot by rinsing.
Electrical Connection
• Make sure that the machine is switched off (operating switch on "0").
Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine.
For details see the machine label.
• Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
1. Pull the lid of the water tank forwards. Fill the machine to the number of cups
required with cold water.
2. Swing the filter out to the right. Insert a filter (size 1 x 2) into the filter funnel and
fill it with coffee powder. Then close the filter holder until it locks in place.
3. Place the pot on the hot plate and close the lid of the water tank.
4. Turn the switch to position "1". The coffee will begin to percolate. After perco-
lation you may remove the pot.
5. If you would like to keep the remaining coffee warm, the switch must remain in
position "1". The hotplate will keep the coffee warm until the switch is moved
to the "0" position. The machine is then switched off.
Descaling is necessary when the time needed to prepare coffee becomes consider-
ably longer.
Only commercially available descaling products based on citric acid should be used.
Before cleaning the machine you should always remove the mains lead and wait
until the machine has cooled down. The machine should only be cleaned with a
slightly damp cloth. Do not use any strong detergents or solvents for cleaning. The
coffee pot and the filter pad should be cleaned by rinsing in cold water.
Model:........................................................................................................................ KA 3131
Power supply:....................................................................................................... 230 V, 50 Hz
Power consumption:........................................................................................................800 W
Protection class:....................................................................................................................... Ι
30
First Use of the Machine
Operation
Descaling
Cleaning
Technical Data
11.05.2007 10:42 Uhr mole

Publicidad

loading