Publicidad
Idiomas disponibles
Idiomas disponibles
For a OPTIMAX2 protocol operation, following parameters must be fulfilled:
Control
TCP (Unicast)
Unicast Audio (point
UDP (Unicast)
to point)
Multicast audio
UDP (Multicast)
(point to multipoint)
Configuration
UDP (Unicast)
Integration XML
TCP (Unicast)
Integration JSON
TCP (Unicast)
Integration SNMP
UDP (Unicast)
Integration SIP
UDP (Unicast)
ICMP
ICMP (v4)
It is strongly recommended to apply QoS policies (quality of service), both at the network level and at the equipment level, estab-
lishing priorities between the different types of traffic according to the following table:
CC-200ETH8 Version 6.0.001
CC-200ETH8
Protocol
Multicast address
Between 239.0.0.0 and
239.255.255.255
Priority
Global Audio
HIGH
Local Audio
Integration SIP
TELNET
SSH
Control
MEDIUM
Configuration
Integration XML
Integration JSON
Integration SNMP
FTP
LOW
FTPS
TCP/IP connections controller
Port
10102,10103,10104
Between 6000 and 32000
Between 6000 and 32000
10001
27000
28000
161
162 (TRAPS)
5060 (Control)
7078 (RTP Audio)
Protocol
UDP (Multicast)
UDP (Unicast)
UDP (Unicast)
TCP (Unicast)
TCP (Unicast)
TCP (Unicast)
UDP (Unicast)
TCP (Unicast)
TCP (Unicast)
UDP (Unicast)
TCP (Unicast)
TCP (Unicast)
R+D Department
for Optimax2 system
Others
Selected by configs.
Prefixed Multicast address-
es (static) for each global
sender. Selected by configs.
Configurations from PC.
Integration to PC
(optional).
Direct integration and con-
trol to equipment.
Check the communication of
the equipment in the instal-
lation.
14
Publicidad
