Descargar Imprimir esta página

GreenWorks OVB913 Manual Del Operador página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

mile
4. Place both hands on the handlebar. Gently turn the
throttle inward to start your trip.
4.3
HEADLIGHT ON/OFF
Press the headlight button to turn on the headlight.
Press the headlight button again to turn off the
headlight.
4.4
ACTIVATE WALK-ASSIST MODE
To activate walk-assist mode, press and hold the
walk-assist button until the product starts moving.
English (Original Instructions)
mile
mile
When using walk-assist mode, the bike will move
at a constant speed of 2.5 mph (4 km/h). The walk-
assist symbol will be displayed on the screen.
ONLY ACTIVATE WALK-ASSIST MODE WHEN
WALKING ON A SLOPE. MOUNTING OR RIDING
THE PRODUCT WHILE IN WALK-ASSIST MODE
CAN INCREASE THE RISK OF INJURY DUE TO
POTENTIAL LOSS OF BALANCE.
Release the walk-assist button to disengage the
walk-assist mode.
4.5
SHIFT GEARS
Note: The gear system comprises a network of levers,
guides, and tension pulleys that facilitate the movement
of the drive chain between the 7 sprockets located
at the rear wheel. Its primary function is to help you
maintain a consistent and smooth pedaling rhythm
across different terrains, reducing the effort required
when cycling uphill or downhill.
Note: Do not shift derailleur gears when you are
stopped. For a smooth gear change when approaching
a hill, shift to a lower gear before your pedaling speed
slows down too much. When coming to a stop, shift to a
lower gear first so it will be easier when you start riding
again. For optimal performance and extended chain
life, it is recommended that you avoid using extreme
combinations of gear positions for extended periods.
15
mile
WARNING
EN

Publicidad

loading

Este manual también es adecuado para:

7422202