Publicidad
Idiomas disponibles
Idiomas disponibles
5
DISPLAY SETTINGS
Note: Set the parameters only when the product is
stopped.
5.1
DISPLAY INTERFACE SWITCH
1. Press the on/off button to turn on the display,
which shows the real-time speed (mph) and the trip
distance (mile) by default.
2. Press the parameter setting button to toggle the
display interface between the trip distance (mile),
ODO (mile), maximum speed (mph) and average
speed (mph).
mile
Trip distance
English (Original Instructions)
mile
ODO
mile/h
Maximum speed
5.2
DISPLAY BRIGHTNESS SETTINGS
1. Press and hold both the plus and minus buttons for
more than two seconds to enter the custom setting
interface.
2. The display will show "01P."
3. Press the parameter setting button to enter
parameter modification area (located at the left of
the display).
4. Use the plus/minus buttons to select the desired
brightness level.
17
EN
mile/h
Average speed
Publicidad
