Brandson Equipment 306234 Manual Del Usuario página 14

5. Operation
You can switch to different modes in the display by pressing the "multifunction button".
Toggling between
the units "GAL"->"L
FLOW MODE - Real-time water flow measurement When the water flows through the flow
meter, the display is activated and shows the current flow in GAL/min or L/min.
CONSUMPTION MODE - Measures the individual water consumption. Press the "multifunction
button" to display the last water consumption. Press and hold the button for 3 seconds to
reset the consumption. The display starts again at 0 when you measure next.
AVERAGE MODE - Displays the daily average water consumption for the last 7 days. Press the
"multifunction button" and the average water consumption of the last 7 days is displayed.
Press and hold the "multifunction button" for 3 seconds to reset the average.
14
Reset
consumption
Reset
average
Reset all data
English