Descargar Imprimir esta página

Kenmore 106 Serie Manual De Uso Y Cuidado página 22

Ocultar thumbs Ver también para 106 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Replace the bulb with a 40-watt appliance bulb.
4. Replace the light shield.
5. Plug in refrigerator or reconnect power.
Upper freezer light (on some models):
1. Unplug refrigerator or disconnect power.
2. Remove the light shield by grasping the top center of
the shield and pulling forward while turning it slightly to
one side.
3. Replace the bulb with a 40-watt appliance bulb.
4. Replace the light shield by grasping the top center of
the shield and inserting the tabs on one end into the
slotted holes in the freezer liner. Then, carefully bend
the shield at the center to insert the tabs on the other
end.
5. Plug in refrigerator or reconnect power.
If the electricity in your house goes off, call the power
company and ask how long it will be off.
1. If the power will be out for 24 hours or less, keep both
refrigerator
doors closed to help foods stay cold and
frozen.
2. If the power will be out for more than 24 hours:
a) Remove all frozen food and store it in a frozen food
locker.
OR
b) Place 2 lb. (907 g) of dry ice in the freezer for every
cubic foot (28 liters) of freezer space. This will keep
the food frozen for two to four days. While handling
dry ice, wear gloves to protect your hands from ice
burns.
OR
c) If neither a food locker nor dry ice is available,
consume up or can perishable food at once.
REMEMBER: A full freezer stays cold longer than a
partially filled one. A freezer full of meat stays cold longer
than a freezer full of baked goods. If you see that food
contains ice crystals, it may be safely refrozen, although
the quality and flavor may be affected. If the condition of
the food is poor, or if you feel it is unsafe, dispose of it.
Vacations
If you choose to leave the refrigerator on while you're
away, use these steps to prepare your refrigerator before
you leave.
1. Use up any perishables and freeze other items.
2. If your refrigerator has an automatic ice maker:
Raise ice maker arm to OFF (up) position.
Shut off water supply to the ice maker.
3. Empty the ice bin.
If you choose to turn the refrigerator
off before you
leave, follow these steps.
1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least
one day ahead of time.
When the last load of ice drops, raise the ice maker
arm to the OFF (up) position.
3. Depending on your model, turn the Thermostat Control
(or Refrigerator Control, depending on the model) to
OFE See the "Setting the Controls" section.
4. Clean refrigerator, wipe it, and dry well.
5. Tape rubber or wood blocks to the tops of both doors to
prop them open far enough for air to get in. This stops
odor and mold from building up.
Moving
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least
one day ahead of time.
Disconnect the water line from the back of the
refrigerator.
When the last load of ice drops, raise the ice maker
arm to the OFF (up) position.
2. Remove all food from the refrigerator and pack all
frozen food in dry ice.
3. Depending on your model, turn the Thermostat Control
(or Refrigerator Control, depending on the model) to
OFE See the "Setting the Controls" section.
4. Unplug the refrigerator.
5. Empty water from the defrost pan.
22

Publicidad

loading