Installation Instructions
L
– S
ENSES
ET UP GUIDE
Fixed Iris lenses - Set the lens focus to infinity and view an image greater than 5 meters away. If the
picture is not clear and appears out of focus, use the back focus adjustment to improve the picture.
Manual Iris lenses - Open the iris fully and set the lens focus to infinity. View an image greater than 5
meters away. If the picture is not in focus, use the back focus adjustment to improve the picture. Adjust
the focus and iris as required.
Auto-Iris and Direct Drive lenses - Fully open the iris by covering the lens with a suitable neutral
density filter (ND) (not supplied). Set the lens focus to infinity and view an image greater than 5 meters
away. Focus the image using the back focus adjustment. Remove the ND filter and adjust the focus as
required. Repeat this process to confirm.
Focussing may vary between day and night time, and the amount of infra red light viewed by the
camera.
1
S
ETUP
WARNING:-
Do not expose the unit to moisture.
Slide out for
control panel
Control
panel
Figure 1. Parts of the camera
Note:
Lens not included.
Note:
The bracket used with the mounting threads is an option.
4
Mounting threads
Iris connector
Iris lens plug
Back focus
Thumbwheel locking
thumbwheel
screw
and provided
screwdriver