Panasonic CQ-R115SEUC Manual De Instrucciones página 21

A Installation Procedures
IN-
1. Secure the Mounting Collar ©.
Insert Mounting Collar @ into the car's dashboard, and bend mounting tabs out with a screwdriver.
Dashboard
An
(D Mounting Collar
2. Secure the rear of the unit. Screwdriver
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
© Mounting Bot—— S
e
Unit
Unit ————
i
c) Insert the unit into Mounting Collar @ and push it in until "click" is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods.
H Using the Rear Support Strap Ô)
Affix one end of the Rear Support Strap @) to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
M Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt on the rear of the unit with Rubber Cushion (Optional), and mount it into the
existing Rear Support Bracket.
Fire Wall of Car
: 3
@ Tapping Screw
á
Rear Support Bracket
{existing on the car)
Ñ
Rubber Cushion
(Optional)
()Mountin Bolt
CQ-R115SEUC EN