Publicidad
Reversing
the
Door
Hinge
1, Remove the top hinge cover screw and then remove
the top hinge cover.
(see fig. # 1)
2, Using a Phillips Head Screwdriver,
loosen and remove the
screws holding
the top hinge in place, (see fig. # 1)
3. Remove the top hinge and carefully
lift off the door.
4, Remove the screw hole plug from the opposite
side and
insert the plug in the screw hole openings
of the just
removed
screws. (see fig. # 2)
5, Remove the door pin from the bracket
of the lower
hinge by turning
counter
clockwise.
Move the pin to the
opposite
hole and tighten,
(see fig. # 3)
6, Loosen the screws holding
the lower hinge bracket
and remove
the hinge.(see
fig, # 3)
7, Align
the holes in the lower hinge bracket to the
corresponding
holes in the opposite
side of the cabinet,
Insert and tighten the screws,(see
fig. # 3)
8, Align
the bottom
hole on the left side of the door with the
pin of the lower hinge and slide into place.
screw hole plug
/
I I
I I
t-:iI
f
_
......._ ....
i_
fig, # 2
Publicidad
