Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
5. Press the accelerator to increase the speed.
6. Push the brake lever to stop or to ride more slowly.
7.
Get off the electric scooter only when you ride at a very low speed or when you are still.
8. Fold down the kickstand (15, Fig. 22) to park the electric scooter when not in use.
5.2 Driving modes. Fig. 23
Control panel
Power button:
-
Long press: switch the electric scooter on or off.
-
Short press: switch between the following modes:
1.
PEDESTRIAN mode: the mode indicator on the display will show a person walking. In this
mode, the scooter can reach 6 km/h. The taillight will flash when driving in this mode.
2. COMFORT mode: In this mode, the scooter can reach 15 km/h.
3. SPORT mode: the mode indicator on the display will show a white "S". In this mode, the
scooter can reach 20 km/h.
NOTE: measured with a weight of 80 kg, fully charged battery, flat surface, no inclination, no
wind, and a ambient temperature of approx. 25 °C.
Function button:
-
Short press: switch the scooter lights on or off.
-
Long press (3 seconds): enter the settings menu.
Scooter lock:
-
Make 5 short presses on the on/off button to lock the scooter. The lock symbol will appear
on the display.
-
Make 5 short presses on the on/off button to unlock the scooter. The lock symbol will
disappear on the display.
Settings menu
-
Once inside the settings menu, press the power button to switch between P0 and P1.
-
Press the function button to navigate between the different settings functions (P0 and P1).
Access the desired function by pressing the power button and toggle between 0 and 1 by
pressing the function button. Select the desired setting by pressing the power button. To
return to the main settings menu, wait a few seconds without pressing any buttons. The
different settings functions are:
1.
P0 - Units of measurement: km/h (0) or mph (1). Speed can be measured in kilometres per
hour (0) or miles per hour (1).
66
ORIGINAL MANUAL TRANSLATION
Publicidad
