Publicidad
Idiomas disponibles
Idiomas disponibles
2. P1 - Total trip distance measurement (ODO) or current trip (TRIP).
5.4 Wheel use
-
For a correct operation of the electric scooter, you should check and ensure the correct
pressure on the wheels before every use.
-
The optimum pressure for these wheels is de 35 PSI / 2.5 bars / 250 kPa.
-
We recommend you carry out periodic checks to ensure the pressure is within the
recommended values to achieve efficient operation.
-
During the shelf life of the wheels, we recommend using heat-sealing gels to prevent
punctures and maintain maximum effectiveness and performance.
5.5 Pairing
6. CLEANING AND MAINTENANCE
-
Make sure the device is not plugged to the power supply or switched on before cleaning
or maintenance.
-
Use a soft cloth to clean the exterior housing of the electric scooter.
-
Never use alcohol, petrol, paraffin, corrosive, or abrasive products to clean the electric
scooter.
-
Never immerse the electric scooter in water or any other liquid to clean it, as this could
damage the electronic parts permanently.
-
Never use pressurised water to clean the electric scooter.
-
Do not try to repair the electric scooter on your own. Should it not work correctly or be
damaged, please contact the official Cecotec Technical Support Service.
-
Self-tapping nuts and other fasteners may loosen their hold and need to be retightened.
Brake disc
You must check the brake discs are in perfect condition, matching the brake calliper: fix this
easily with the Allen key provided. Brake pads are consumable parts and must be replaced
when their shelf life expires.
By scanning the following QR code you will be able to access the app
download option and an instruction manual explaining how to pair
your appliance:
BONGO D20 XL CONNECTED
ENGLISH
67
Publicidad
