Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LY
ASSEMBLE
GAUGE WHEELS TO MOWER
DECK (See Fig, 6)
The gauge wheels are designed to keep the mower deck in
proper position when operating mower Be sure they are
properly adjusted to ensure optimum mower performance°
•
Adjust mower to desired cutting height (See "TO AD-
JUST MOWER CUTTRqG HEIGHT
in the Operation
section of this manual}.
o
With mower in desired height of cut position, gauge
wheets should be assembled so they are slightly off the
ground, tnstali gauge wheel in appropriate
hole with
shoutder bott, 3/8 washer,
and 3/8o16 Iocknut and
tighten secure{y.
Repeat for opposite side installing gauge wheel in
same adjustment hoie.
GAUG
WHEEL
BRACKET
3/8-16
LOCKNUT
3/8
GAUGE WHEEl[,:
RG. 6
/CHECKLIST
BEFORE
YOU OPERATE
AND El#JOY
YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCEAND
SA TISFACTION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING
CHECKLIS_C_
,/
All assembly instructions have been completed.
V" No remaining loose parts in carton.
¢"
Battery is propedy prepared and charged.
(Minimum
1 hour at 6 amps).
,/
Seat is adjusted comfortably and tightened secure!y.
,/
All tires are properly inflated. (For shipping purposes,
the tires were ovednfiated at the factory).
v"
Be sure mower u_;_ is p_
.....
O_J_
ly'°" leveled o,_°_,_-o,,_,_'_^
,_ ,. ,4,,/
front4o-rear
for best cutting results.
(Tires must be
properly inflated for leveling).
¢"
Check mower and drive be_ts. Be sure they are routed
properly around pulleys and inside all belt keepers.
¢" Check wiring. See that all connections are still secure
and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTtON TO THE FOLLOWING IMPORTANT
ITEMS:
J
Engine oil is at proper level.
v"
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,/
Become familiar with all controls - their location and
function.
Operate them before you start the engine.
v"
Be sure brake system is in safe operating condition.
10
Publicidad
Tabla de contenido
