Publicidad
Idiomas disponibles
Idiomas disponibles
• Leave the doors open as little time as possible.
• To ensure that the appliance operates properly, clean the condenser
regularly (see "Maintenance and cleaning").
• Regularly inspect the door seals and ensure that they are still closing
properly. If this is not the case, contact your after-sales service.
• Setting temperature above 12 degrees will reduce the energy
consumption of the appliance and below 12 degrees will increase the
energy consumption of the appliance.
Refrigerating fluid
The refrigerating circuit in the appliance uses refrigerating isobutane
(R600a), which is a highly inflammable natural gas and is therefore
dangerous for the environment. When transporting or installing the
appliance, please make sure that no element of the refrigerating circuit
is damaged, as the refrigerating fluid (R600a) is inflammable.
Installation instructions
Before using your wine cooler:
• Remove inner and outer packaging.
• Before plugging the appliance to the electrical socket, leave it in
position for 24 hours. This will reduce the refrigeration circuit's
possibility of malfunction due to transport.
• Clean the inside using a soft cloth and lukewarm water.
Using your wine cooler
• Your wine cooler must be positioned in a room with an ambient
temperature between 16 and +38 ºC
• If the ambient temperature is higher or lower, your appliance's
performance may be affected and it may not reach temperatures set
for each model.
12
Publicidad
