Publicidad
Idiomas disponibles
Idiomas disponibles
• When switching it on for the first time or following an extended
shutdown, it is possible that when restarting, the temperatures
selected and those displayed are not the same. Please note that this
is normal, and it will take a few hours before they stabilise.
If you need to move your wine cooler
• First, unplug your appliance.
• Remove all bottles and secure any loose parts.
• To avoid damaging the levelling screws on the feet, screw them
tightly into the base.
• Move the appliance in an upright position (preferably) or note the
direction in which the appliance may be laid down by looking at its
packaging.
In the event of a breakdown
Despite the care we take during production, a breakdown can never be
totally ruled out. Before contacting your retailer's after-sales department,
please check if:
1. The appliance is properly plugged in;
2. A power cut is in progress;
3. The breakdown different than the ones described in the
troubleshoot table at the end of this manual.
CAUTION!: Unplug the appliance before carrying out any maintenance
or repair work.
Handle installation
1. Open the door and carefully pull out the door gasket only at the area
where the handle is to be installed.
Wine Cooler | Vinoteca | Cave de Vinho
EN
17
Publicidad
