Publicidad
Idiomas disponibles
Idiomas disponibles
Installing your wine cooler
• This wine cooler is designed for free-standing installation.
• Position it in a place strong enough to support its weight when
loaded. To ensure that it is levelled, adjust the height of the feet
underneath.
• To get the best from your appliance with the lowest energy
consumption, do not place the appliance close to a heat source
(heater, cooker, etc.), do not expose it to direct sunlight, and do not
place it in a room that is too cold.
• Connect the appliance to a single socket, leaving a 20 mm gap
between the back of the cooler and the side wall. Be careful when
adjusting it, so that your wine cooler is perfectly levelled. This
will avoid any movement due to instability, generating noise and
vibration, and will ensure that the door seals perfectly.
Wine Cooler | Vinoteca | Cave de Vinho
EN
13
Publicidad
