Cisco Systems Linksys WPC54G Instalación Rápida página 88

D
The Wireless Security screen will
appear. If your wireless network
doesn't use wireless security,
select Disabled and then click
Next. Proceed to Step E.
Select the security method you
want to use: WEP , WPA
Personal, WPA2 Personal, WPA
Enterprise, WPA2 Enterprise,
RADIUS, or LEAP . WEP stands for
Wired Equivalent Privacy, and
WPA uses a security standard
stronger than WEP encryption.
RADIUS stands for Remote
Authentication Dial-In User
Service. LEAP stands for
Lightweight Extensible
Authentication Protocol.
For WEP , WPA Personal, and
WPA2 Personal, proceed to the
appropriate instructions.
For all other methods, refer to
the User Guide (English only) on
the CD-ROM for instructions.
WEP
Select a level of WEP
encryption to use, and then
enter a passphrase or WEP key.
WEP - Select 64-bit or 128-bit.
Passphrase - Enter a
passphrase, so a WEP key is
automatically generated. The
8
Disabled
WEP