König Electronic Nano HomePlug Manual De Uso página 4

The procedure is as followes:
1. Press and hold the security button on HomePlug A for about 10 seconds. Release when the power
light flashes. The password to HomePlug A has just been erased. It must be linked to your network
to adopt the new network security key.
2. Do the same for HomePlug B.
3. Now, HomePlug A and B are now networked separately.
4. Press and hold the security button on HomePlug A for 2 seconds and then release.
5. The power light of bridge A starts to flash.
6. Within 120 seconds press and hold the security button on HomePlug B for 2 seconds and then
release.
7. Both HomePlug A and B are now networked together.
2.2 Adding HomePlug C to an existing Network AB (Network ABC)
The procedure is as followes:
1. Press and hold the security button on HomePlug C for about 10 seconds. Release when the power
light flashes. The password to HomePlug C has just been erased. It must be linked to your network
to adopt the new network security key.
2. Press and hold the security button on HomePlug C for 2 seconds. The power light starts to flash.
3. Within 120 seconds, press and hold the security button on HomePlug C for 2 seconds and then
release.
4. HomePlug A, HomePlug B and HomePlug C are now networked.
4