Publicidad
Idiomas disponibles
Idiomas disponibles
If your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
on the machine requires special training.
This is especially true of the machine's
safety equipment. If your machine fails
any of the checks described below you
must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
To do a check of the keypad
1. Push and hold the start/stop button (A).
A
B
a) The product is on when the LED (B) comes on.
b) The product is off when the LED (B) comes off.
Troubleshooting on page 15 if the warning
2. Refer to
indicator (C) comes on or flashes.
To do a check of the power trigger lockout
The power trigger lockout is designed to prevent
accidental operation. When you press the lock (A)
it releases the power trigger (B). When you release
the handle, the power trigger and the power trigger
lockout both move back to their original positions. This
movement is operated by independent springs.
B
8
All servicing and repair work
C
A
1. Make sure that the power trigger is locked when the
lock is in its original position.
2. Press the power trigger and make sure it returns to
its original position when you release it.
3. Make sure that the power trigger and the lock moves
freely and that the return spring works properly.
4. Start the product, see
12 .
5. Apply full throttle.
6. Release the power trigger and make sure that the
cutting attachment stops and remains still.
To do a check of the cutting attachment guard
WARNING:
attachment without an approved and
correctly attached cutting attachment guard.
Always use the recommended cutting
attachment guard for the cutting attachment
that you use, see
page 18 . If an incorrect or defective cutting
attachment guard is attached this can cause
serious injury.
The cutting attachment guard stops objects that eject in
the direction of the operator. It also prevents injuries that
occur if you touch the cutting attachment.
To start the product on page
Do not use a cutting
Approved accessories on
795 - 007 - 06.05.2022
Publicidad
