Publicidad
Idiomas disponibles
Idiomas disponibles
TTB883ROU
Fig.9
3
Fine adjusting the depth cut
Use the adjustment knob (9a) for precise setting of cutting depth.
The adjustment can be done both in locking and releasing position
of lunge lock lever (4). Turning of adjustment knob (9a) can perform
fine adjustment of cutting depth according following information:
1 mark on scale wheel (9b) = 0.1 mm
1 turn of scale wheel (9b) = 2.0 mm
Total adjustment range = 0-8 mm
1. Align the "0" mark on the scale wheel (9b) with the fixed
indicator on the housing by turning the scale wheel (9b)
without touching the adjustment knob (9a) (Fig.11).
2. Rotate adjustment knob (9a) clockwise to increase the cutting
depth while the scale wheel (9b) turns with the adjustment
knob (9a) synchronously.
3. Rotate adjustment knob (9a) anticlockwise to decrease
the cutting depth while the scale wheel (9b) turns with the
adjustment knob (9a) synchronously (Fig.12).
Fig.11
2
3
1
Funções do produto
Fig.10
Fig.12
PT
123
123
Publicidad
