Descargar Imprimir esta página

Hilti C 4-22 02 Manual De Instrucciones página 23

Ocultar thumbs Ver también para C 4-22 02:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
▶ Store batteries in a cool and dry place. Cool storage will increase battery life. Never store batteries where
they are exposed to direct sunlight, on sources of heat or behind glass.
▶ Do not send batteries through the mail. Consult your shipper for instructions on how to ship undamaged
batteries.
▶ Never transport batteries in bulk form (loose, unprotected). During transport, batteries should be
protected from excessive shock and vibration and isolated from any conductive materials or other
batteries that may come in contact with the terminals and cause a short circuit. Comply with the locally
applicable regulations for transporting batteries.
Maintenance and disposal
▶ Keep the battery free of oil and grease. Do not permit dust or dirt to accumulate unnecessarily on the
battery. Clean the battery with a dry, soft brush or a clean, dry rag.
▶ Never use a battery with clogged ventilation slots. Clean the ventilation slots carefully using a dry, soft
brush.
▶ Prevent unnecessary exposure of the battery to dust or debris and never subject the battery to soaking
moisture (e.g., submerged in water or left out in the rain).
▶ If a battery is exposed to soaking moisture, treat it as a damaged battery and isolate it in a non-flammable
container.
▶ See the section headed What to do in case of damaged batteries .
▶ Improper disposal may cause health hazards from leaking gases or fluids. Dispose of the battery at your
Hilti Store, or consult your local governmental garbage disposal or public health and safety resources
for disposal instructions. Comply with the locally applicable regulations for transporting damaged
batteries!
▶ Do not dispose of batteries as household waste.
▶ Dispose of your battery out of the reach of children. Cover the terminals with a non-conductive material
(such as electrical tape) to prevent short circuiting.
Originele handleiding
1
Informatie over de handleiding
1.1
Bij deze handleiding
Waarschuwing! Zorg, voordat u het product gebruikt, dat u de bij het product meegeleverde handleiding
incl. de aanwijzingen, veiligheidsinstructies en waarschuwingsaanwijzingen, afbeeldingen en specificaties
gelezen en begrepen hebt. Maakt u zich met name met alle aanwijzingen, veiligheidsinstructies en
waarschuwingsaanwijzingen, afbeeldingen, specificaties en bestanddelen en functies vertrouwd. Als
u dit niet doet, bestaat het risico op een elektrische schok, brand en/of ernstig letsel. Bewaar de
handleiding inclusief alle aanwijzingen, veiligheidsinstructies en waarschuwingsaanwijzingen voor later
gebruik.
producten zijn bestemd voor de professionele gebruiker en mogen alleen door geautoriseerd,
vakkundig geschoold personeel bediend, onderhouden en gerepareerd worden. Dit personeel moet
speciaal op de hoogte zijn gesteld van de mogelijke gevaren. Het product en zijn hulpmiddelen
kunnen gevaar opleveren als ze door ongeschoolde personen op ondeskundige wijze of niet volgens de
voorschriften worden gebruikt.
De meegeleverde handleiding komt overeen met de actuele stand van de techniek op het tijdstip op het
moment van druk. De actuele versie vindt u altijd online op de Hilti productpagina. Volg hiervoor de link
of de QR-code in deze handleiding, gemarkeerd met het symbool
Geef het product alleen met deze handleiding aan andere personen door.
1.2
Verklaring van de tekens
1.2.1
Waarschuwingsaanwijzingen
Waarschuwingsaanwijzingen waarschuwen voor gevaren bij de omgang met het product. De volgende
signaalwoorden worden gebruikt:
GEVAAR
GEVAAR !
▶ Voor een direct dreigend gevaar dat tot ernstig letsel of tot de dood leidt.
*2275226*
2275226
.
Nederlands
19

Publicidad

loading