Costway AD10018 Manual Del Usuario página 6

Opening ways of Chair stand
Press the button on both sides, open front and rear tube to maximum.
1. Hold down the button on both sides. Then, pull open front and rear legs to
maximum.
2. Release the button and try to push legs together to confirm they are
locked. Then pull the chair upward to the highest position.
3. Make sure the whole chair is in a stable state.
fold button
Foot pedal installation
Insert the foot pedal set into the chair body' s
square hole.
10
(pic 1)
(pic 2)
Foot pedal angle adjustment
Hold down the round adjustable button on both pedal sides. Rotate the pedal
up and down with the button as the axis. Pedal can be adjusted into three
positions.
(pic 3)
Pedal height adjustment
Hold the height adjusting button in 3 holes of pedal on two sides. Push the
lower part of the foot pedal downwards to lock it in in the lower holes. This
will lower the pedal. Otherwise, push the pedal upwards to lock it in above
holes. This will raise the pedal. Pedal can be adjusted within three positions.
(pic 4)
press three position
adjustable button
press three position
adjustable button
11