Levoit LV600S Serie Manual Del Usuario página 12

EN
U S I N G YO U R S M A R T H U M I D I F I E R
Note:
Using the VeSync app allows you to
control your smart humidifier remotely and
access additional functions and features (see
page 16).
1. Plug in the humidifier. The humidifier will
light up, then turn off.
2. Press
humidifier will start misting.
Note:
If there is no water in the tank,
flash 10 times, and the humidifier will turn off.
Fill the water tank (see
page 9).
3.
Press repeatedly to cycle through
mist settings: Low, Medium, and High.
4.
Rotate the nozzles to adjust the direction
of the mist.
Note:
•
Direct the nozzles away from any
furniture, walls, or other objects to
prevent them from getting wet.
• Do not
nozzles.
5. Optionally, use the controls or the VeSync
app to turn on warm mist, activate Sleep
Mode, and more (see
6.
When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it off.
A comfortable humidity level is between
40% and 60%.
Note:
You can also set the humidifier to
automatically stop misting when the room
reaches a specific humidity level (see
Humidity Level
7.
Press
12
to turn your humidifier on. The
Getting Started
[Figure 3.1]
inhale the mist directly from the
Controls , page 8).
, page 13).
to turn your humidifier off.
will
,
Figure 3.1