Ameriwood HOME 5757354COM Instrucciones De Montaje página 20

STEP 14
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, turn the unit over as shown. Position the back panel (S) as
shown. Flush the bottom edge of the back panel with the edge of the bottom (D). Assure that the
unit is square. Distance from corner to corner must be equal as shown. Nail straight into back
edges as shown.
back panel notch
ameriwoodhome.com
11
(x32)
#A21110
S
D
20
11
Make sure edges are flush
with each other.