Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 13 Monday, December 18, 2023 1:46 PM
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors.
-
Dimensions/Clearances
A
Depth without Handle
B
Width
C
Height to Top of Case
D
Height to Top of Hinge
E
Back Clearance
F
Depth without Door
G
Depth (Total with Door Open 90°)
Removing/Assembling
Doors
The method for removing/assembling the door
may differ depending on the model.
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
B
G
C
D
E
F
A
LT18S2100*
LT18S1100*
33 1/2" (851 mm)
27 1/2" (700 mm)
64" (1625 mm)
65" (1650 mm)
2" (50 mm)
29 1/2" (750 mm)
58" (1474 mm)
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
• Tools Needed
- Flat-head screwdriver
- Phillips screwdriver
- Adjustable wrench
- 1/4 in. Hex socket wrench
INSTALLATION
13
Publicidad
