Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Workpiece has burn marks
Edges of the milling tear out
Grooves and unevenness in
the milled surface
Dust is not extracted
Spare parts and accessories
You can get spare parts and accessories from www.grizzlytools.shop. If
you have any problems with your order, contact us via our online shop. If you have any
other questions, contact the Service Centre, p. 35
Pos. nr.
Name
7 + 14
2× Collet chuck, 8 mm + 6 mm
15 + 18
Parallel guide + 2× Sliding bar
19
Depth stop
20
Adapter for external dust extraction
31
Centring tip
32
Template guide
6-part cutter set
Service
Guarantee
Dear Customer,
This product is provided with a 3 year
guarantee from the date of purchase.
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The guarantee period begins on the date
of purchase. Please retain the original re-
Possible cause
Unsuitable or blunt cutter
Milling depth is too large
Cutter is worn and diffuse
Cutter blades are damaged
Vacuum cleaner not switched
on
Suction hose or adaptor
for external dust extraction
blocked
ceipt. This document is required as proof
of purchase.
If a material or manufacturing defect oc-
curs within three years of the date of pur-
chase of this product, we will repair or
replace – at our choice – the product
for you free of charge. This guarantee re-
quires the defective product and proof of
purchase to be presented within the three-
year period with a brief written description
of what constitutes the defect and when it
occurred.
If the defect is covered by our guaran-
tee, you will receive either the repaired
GB
Error correction
Change the cutter
Setting the milling depth,
p. 28
Change the cutter
Switch on vacuum cleaner
before milling
Removing obstructions and
blockages
Order No.
91110537
91110532
91110528
91110529
91110533
91110531
91110536
MT
33
Publicidad
