Grundig MDI231 Manual De Instrucciones página 20

Press the On/Off key to turn on the
thermometer and proceed to 2s full-
screen display. Then the temperature
value of the previous measurement
will be displayed for 2s, and then
the thermometer will get into the
forehead temperature mode with a
"beep" sound. Aim the temperature
measuring probe at the forehead
and press the Measure key (if you
press and hold the Measure key, the
thermometer will keep scanning with
several "beep" sounds and then com-
plete the measurement when you re-
lease the Measure key) to perform a
measurement, and the temperature
value will be displayed on the screen
with a "beep" sound. Such temper-
ature value is displayed with green
(<37.5°C), orange (37.5°C ≤tem-
perature <38.0°C) or red (≤38.0°C)
backlight, as shown below.
NOTE:
Make sure the temperature measur-
ing probe aims at and touches the
forehead (between the eyebrows)
closely.
TEMPERATURE TAKING HINTS
- Before take the temperature, please
fix the forehead hair to prevent
measured deviation.
20