Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
1. ON/OFF button
2. Cord retraction button
3. Suction power regulator
4. Flexible tube
5. Telescoping tube
6. Multi-surface brush
7. Parquet brush
8. Crevice brush tool
9. Bag status indicator
10. Release pedal
VACUUM ASSEMBLY
Remove all components from the packaging.
Attach the flexible tube to the vacuum body,
making sure it is fully inserted and secure.
Fit the handle of the flexible tube into the
telescoping tube.
Fit the desired accessory onto the end of
the telescoping tube.
The multi-surface brush has two positions,
one for soft surfaces and one for hard
surfaces. The crevice brush tool is used for
narrow, difficult to reach surfaces.
OPERATING INSTRUCTIONS
Before use
Make sure to only use the appliance if
all the included filters and dust bag are
correctly installed. An incorrectly installed
or damaged dust bag or filter can damage
the appliance.
Use
Extend the power cord and connect the
plug to a wall outlet. Do not pull the cord
beyond the red marker.
Adjust the telescoping tube to the desired
length.
Select the type of flooring to vacuum using
the multi-surface brush:
Hard flooring – Lower the brushes to
protect the flooring.
Carpets – Raise the brushes for deep
cleaning.
Parquet Brush - for parquet floors and
other sensitive floors. Turn on the vacuum
by pressing the ON/OFF button.
Slide the suction power regulator to
increase or decrease suction.
Turn off the vacuum when done using by
pressing the ON/OFF button.
Remove the plug from the wall outlet.
Press the cord retraction button to retract
the cord back into the vacuum.
To move the appliance between rooms,
unplug it from the wall outlet and transport
it using the handle. Never pull the appliance
by the power cord to move it.
CLEANING AND MAINTENANCE
The plug needs to be removed from the wall
outlet before performing any maintenance
or replacing any parts.
Turn off the vacuum when done using by
pressing the ON/OFF button and unplug it
from the wall outlet.
Clean the exterior of the vacuum with a
soft, damp cloth followed by a soft, dry
cloth.
Never use harsh liquids to clean the
vacuum.
English
13
Publicidad
