GE Zoneline AZ9VH Manual Del Propietario Y Instrucciones De Instalación página 26

Setting the auxiliary control
Mode 2 Fahrenheit / Celsius
temperature units between Fahrenheit and Celsius on
the display.
MODE until a 2 appears in the first digit of the
display for Fahrenheit/Celsius mode.
Fahrenheit or a C for Celsius in the second digit of the
display based on the selection.
Mode 3 Freeze Sentinel / Heat Sentinel
With power to the unit and Freeze Sentinel activated,
the unit automatically provides heat without user
turning the heater and indoor fan ON
OFF
When Heat Sentinel is activated, the unit automatically
an excessively hot room by turning the air conditioner
ON OFF once the room temperature
MODE until a 3 first appears in the first digit of
the display for Freeze Sentinel
for OFF + pad for ON
access the Heat Sentinel
OFF + pad for ON
in your selection and exit AUX mode, or press MODE
to continue setting other functions.
Freeze Sentinel is on.
NOTE:
unit is plugged in, even if the unit is not receiving
thermostat signals.
Mode 4 Constant ON Fan
MODE until a 4 appears in the first digit of the
display to set the fan to run continuously - even if the
unit is not receiving thermostat signals.
- pad for OFF
AUX to lock in your selection and exit AUX mode
or press MODE to continue setting other functions.
- pad
MODE again to
- pad for
AUX to lock
Heat Sentinel is off,
+ pad for ON
OFF.
F
Freeze Sentinel OFF
Freeze Sentinel ON
Heat Sentinel OFF
Heat Sentinel ON
Constant
Fan OFF
C
Constant
Fan ON
49-5000640 Rev. 2