Publicidad
Idiomas disponibles
Idiomas disponibles
Control features vary by model.
4
8
PULL
TO START/PUSH
TO STOP
Select Options
Extra Rinse (select models)
When the knob is in the on position, an additional
rinse at the end of the Regular Fabrics cycle is
provided to more completely
remove laundry additives,
suds, perfumes, etc.
Select Cycle
WRI N KLE-FREE FAB RICS Cycle
Provides normal agitation speed for the first six
minutes, a pause, then slow agitation for the rest of the
wash cycle to protect wrinkle-free
fabrics. Spin speed
will be normal to reduce water retention.
DELICATES Cycle
Provides slow agitation speed and slow spin speed for
delicates
and knits.
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise)
until the pointer is at
the number of minutes needed for the wash load in the
REGULAR FABRICS, WRINKLE-FREE
FABRICS or
DELICATES cycles.
REGU LAR FABRICS
Cycle
Provides normal agitation
and normal spin speeds to
wash cottons and heavily soiled items.
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated
soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
Note:
Do not attempt to turn the control dial
counterclockwise.
Damage to the timer will result.
I
Publicidad
