EVVO V415 STEEL Manual De Instrucciones página 34

ENGLISH
- Function sequence from OFF position:
- Pull 1 time for high speed.
- Pull again: medium speed.
- Pull once more: low speed.
- Pull one last time to turn it off.
Winter/Summer function
The commutator on the fan body is a switch that moves to the left or right
depending on the mode and is used to change the rotation direction (clockwise or
counterclockwise) of the fan blades.
- Winter function: Move the commutator to the clockwise position. The blades will
start to rotate clockwise, causing warm air to be distributed throughout the room.
- Summer function: move the commutator to the counterclockwise position. The
blades will start rotating counterclockwise, causing fresh air to be distributed
throughout the room.
Warning
Before using the commutator, turn the fan off and make sure it has completely
stopped moving to avoid personal and product damage.
5. CLEANING AND MAINTENANCE
Cleaning
Clean with a soft, dry cloth. Do not use chemical or harsh abrasive cleaning agents. Do
not allow condensation to come in contact with the electrical components.
Replacing the light bulb
- Turn the appliance off (preferably, turn it off at the power circuit breaker) and wait
until it cools down.
- Remove the bulb by holding it firmly and turning it counterclockwise. Be careful
- bulbs can reach high temperatures during use. Hold the bulb firmly and turn it
counterclockwise.
- Take a new bulb and put it carefully into the lamp holder. Screw it clockwise.
- Turn the power supply on again and switch the lamp on.
34
V415 STEEL