Introduction; High-Speed Transmissions; Dual Power Input; Flexible Mounting - WEG WCD-SWU serie Manual Del Usuario

Controlador de switch
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Introduction

1 INTRODUCTION
The SWU-5-Tx/8-Tx is a cost-effective solution and meets the high reliability requirements
demanded by industrial applications.

1.1 HIGH-SPEED TRANSMISSIONS

The SWU-5-Tx/8-Tx includes a switch controller that can automatically sense transmission
speeds (10/100 Mbps). The RJ-45 interface can also be auto-detected, so MDI or MDI-X is
automatically selected and a crossover cable is not required. All Ethernet ports have memory
buffers that support the store-and-forward mechanism.
This assures that data is properly transmitted.

1.2 DUAL POWER INPUT

SWU-5-Tx/8-Tx redundant power input design is with power reserve protection to prevent the
switch device broken by wrong power wiring. When one of power input is fail, P-Fail LED will
turn on and send an alarm through a relay output for notifying user.

1.3 FLEXIBLE MOUNTING

SWU-5-Tx/8-Tx is extremely compact (37 x 140 x 95 mm) and can be mounted on a DIN-rail or
a panel, so it is suitable for any space-constrained environment.

1.4 ADVANCED PROTECTION

SWU-5-Tx/8-Tx supports up to 3,000 VDC surge protection for power line, and also supports
4000V ESD for Ethernet ports. With these 2 strong protections, it can secure equipment against
unregulated voltage and make systems safer and more reliable. Further, SWU-5-Tx/8-Tx provides
currency overload protection with a resettable fuse to ensure that the device component won't
be damaged by overload current.

1.5 WIDE OPERATING TEMPERATURE

The operating temperature of the SWU-5-Tx/8-Tx is between -10 ~ 60
. With such a wide range,
K
you can use the SWU-5-Tx/8-Tx in some of the harshest industrial environments that exist.

1.6 EASY TROUBLESHOOTING

LED indicators make troubleshooting quick and easy. Each 10/100 Base-TX port has 2 LEDs that
display the link status, transmission speed and collision status. Also the three power indicators
P1, P2 and P-Fail help you diagnose immediately.
6 | WCD-SWU

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wcd-swu 5-txWcd-swu 8-tx

Tabla de contenido