cecotec READYWARM 2250 CURVED FLAMES CONNECTED Manual De Instrucciones página 37

- On/Off: Press this button to turn the device on or off.
- Day: This button allows you to set the current time and day.
- Hour: press this button to select the timer hours.
- Min: press this button to select the timer minutes.
- Week: Press this button to activate the weekly timer.
- Set up: Press this button to set the timer, select the day of the week with the week button.
- Increase/decrease brightness: press this button to increase or decrease the brightness of
the flame.
- Temperature setting: press this button to select the operating temperature.
- You can adjust the operating temperature in steps of 15-30 °C using the "+" and "-" buttons.
Note
The remote control requires one 3V CR2025 lithium battery (included) Remove the protective
foil between the battery and the contacts in order to operate (see Fig. F and Fig. G).
5. CLEANING AND MAINTENANCE
- Disconnect the device from the power supply and allow it to cool down completely before
cleaning.
- Clean or vacuum dirt from the surface and ventilation openings of the device periodically.
- Do not make the device wet, avoid contact with water or other liquids.
- Avoid the use of abrasive cleaning agents or scouring pads as these could damage the
product.
- Use a soft, damp cloth to clean the device's surface.
6. TECHNICAL SPECIFICATIONS
Product reference: 05813
Product: Chimenea eléctrica ReadyWarm 2250 Curved Flames Connected
Power and voltage: 1750 – 2000 W, 220-240 V~ 50 Hz
IP20
Made in China | Designed in Spain
05813_ReadyWarm 2250 Curved Flames Connected_IM_YV_01210713.indd 37 05813_ReadyWarm 2250 Curved Flames Connected_IM_YV_01210713.indd 37
READYWARM 2250 CURVED FLAMES CONNECTED
ENGLISH
37
16/7/21 9:53 16/7/21 9:53