Gigaset A495 Manual De Instrucciones página 5

Connecting the base station
¤
Connect the plug from the power
adapter 1.
¤
Plug the power adapter into the plug
socket 2.
¤
Then connect the telephone jack
and insert the cables into the cable
ducts.
Please note:
◆
The power adapter must always be
connected, as the phone will not
operate without electrical power.
◆
Use only the power adapter and
phone cord supplied. Pin connec-
tions on telephone cables can vary.
Setting up the handset for use
Inserting the batteries and closing the battery cover
Use only rechargeable nickel-metal hydride (NiMH) UL-approved AAA batter-
ies recommended by Gigaset Communications GmbH (
use a conventional (non-rechargeable) battery or other battery types as this
could result in significant health risks and personal injury. For example, the
batteries could explode. The phone could also malfunction or be damaged as
a result of using batteries that are not of the recommended type.
The display is protected by a plastic film.
Please remove the protective film!
Warning
5
2
1
3
1
¢
page 16). Never
3
1