Motorola COMMERCIAL CM140 Guia Basica Del Usuario página 11

Receiving a Call
1 Turn your radio on.
2 Adjust the radio's volume.
3 Select the desired channel.
4 To respond, hold the microphone vertically 2.5
to 5 cm (1 to 2 inches) from your mouth. Press
the PTT to talk; release it to listen
Note: The system may have a limited call time and
the call may be terminated automatically if
this call time is exceeded.
Sending a Call
1 Turn your radio on.
2 Select the desired channel.
3 Hold the microphone vertically 2.5 to 5 cm
(1 to 2 inches) from your mouth. Press the
PTT to talk; release it to listen.
If your system uses the request-to-talk feature, use
the following method to send a call:
1 Turn your radio on.
2 Select the desired channel.
3 Press the PTT (for priority requests to talk, the
PRTT button) and wait for the talk permit tone.
4 Hold the microphone vertically 2.5 to 5 cm
(1 to 2 inches) from your mouth. Press the
PTT to talk; release it to listen.
Your radio may be configured for 'Transmit Inhibit'
under certain conditions (e.g. when the channel is in
use by others) in which case, the channel busy tone
will sound when you press the PTT or call button to
indicate that transmission is inhibited.
English
9