• Observe the plus (+) and minus (-) polarity signs.
• If a battery has leaked, put on protective gloves and
clean the battery compartment with a dry cloth.
• Protect batteries from excessive heat.
• Risk of explosion! Never throw batteries into a fire.
• Do not charge or short-circuit batteries.
• If the device is not to be used for a relatively
long period, take the batteries out of the battery
compartment.
Components of the device
Program
Three functional
modules
Channel 1 intensity
Program adjust
Intensity adjust
Function module
switch/set time
Step-by-step operating
instructions
Insertion/changing of the batteries
1. Open the battery compartment at the back
2. Insert three AAA batteries (1.5 V) into the battery
compartment; make sure that the symbols (+/- match).
3. Close the battery compartment.
Connecting cables to the device
Electric quantity
Frequency
FITNESS
Channel 2 intensity
Timer
Program adjust
Intensity adjust
On/Off
8
Electrode patches