Publicidad
Idiomas disponibles
Idiomas disponibles
perimeter of the cut or hole and the corners are well radiused.
c) Next hold the patch on the tube and mark out around it with a pencil.
d) Use a grinder, course sand paper or scratch stone, rough up both the back of the patch and the area
marked on the tube.
e) Clean both surfaces with solvent and spread a thin layer of adhesive over them ensuring there are no
lumps.
f)
When the first coat is dry to the touch (about 10 to 15 minutes) apply a second thin coat. After waiting 5
or 6 minutes, touch the adhesive with the back of your hand. If it no longer appears wet, heat both areas
with a hot air gun to re-active the glue and join the patch to the tube and then clamp or roll the surfaces
together. For the best adhesion, roll over the patch with a roller or over the bottom edge of a bottle.
Danger
Glue and solvent used for repair are highly flammable. Perform repairs in a well-ventilated area. Avoid breathing
the vapors, wear protective gears (goggles, filter respirators, latex gloves).
Warranty
The product you have purchased comes with a limited warranty from Highfield Inflatables. The terms of the
warranty are set forth in the Warranty Information section of this manual. The warranty statement contains a
description of what is covered, what is not covered and the duration of coverage. Please review this important
information. The description and specifications contained herein were in effect at the time this manual was
approved for printing. Highfield Inflatables, whose policy is one of continued improvement, reserve the right to
discontinue models at any time, to change specification, designs, methods, or procedures without notice and
without incurring obligation.
Record your Hull Identification Number (HIN).
The HIN is located on the transom plate of your boat. You will need this information to obtain parts, warranty
service or provide information if your inflatable boat is stolen.
HIGHFIELD BOATS – RETAIL LIMITED WARRANTY
1. WHAT IS COVERED
Highfield boats are warranted to be free of defects in material and workmanship during the period described
hereafter:
2. DURATION OF COVERAGE
a) The entire vessel is covered for a period of two (2) years from the date the product is sold.
b) The hull structure is covered by a five (5) years warranty.
c) For commercial use or hire, the entire vessel has a one (1) year warranty.
3. CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN WARRANTY COVERAGE
Warranty coverage is available only to customers that purchase from an authorized Highfield dealer. Routine
maintenance outlined in the Owner's manual must be performed in a timely manner in order to maintain warranty
coverage. If the retail customer performs this maintenance, Highfield Boats reserves the right to make future
warranty coverage contingent on proof of proper maintenance.
4. POWDER COATING
The powder coating is warranted for a period of two (2) years against manufacturing defects.
This warranty excludes damage due to misuse of the boat and chemical or mechanical shocks such as:
a) collision, fire, theft, riot, etc.
b) alteration, modification, tampering
c) environmental corrosion and shocks due to acid rain, chemical fallout, industrial pollution, bird lime, tree
19
Publicidad
